top of page
Journal Publications
Student Granted Supervisor

  • Irene L. Vela, Goto rF.J., Alcalá M.D., Real C.,Córdoba, J.M. Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy. (2018) Journal of Alloys and Compounds, 746, pp. 1-8

  • Chicardi, E., Gotor, F.J., Alcalá, M.D., Córdoba, J.M. Effects of additives on the synthesis of TiCxN1−xby a solid-gas mechanically induced self-sustaining reaction (2018) Ceramics International, 44(7), pp. 7605-7610. (full based on my PhD Dissertation's Chapter 5.2 )

  • Chicardi, E., Gotor, F.J., Alcalá, M.D., Córdoba, J.M. Influence of milling parameters on the solid-gas synthesis of TiCxN1−x by mechanically induced self-sustaining reaction (2017) Powder Technology, 319, pp. 12-18. (full based on my PhD Dissertation's Chapter 5.1 )

  • Córdoba, J.M., Ponce, M., Sayagués, M.J. Structure evolution in the LaMn1−xFexO3+δ system by Rietveld analysis (2017) Solid State Ionics, 303, pp. 132-137.

  • Chicardi, E., Gotor, F.J., Medri, V., Guicciardi, S., Lascano, S., Córdoba, J.M. Hot-pressing of (Ti,Mt)(C,N)-Co-Mo2C (Mt=Ta,Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction (2016) Chemical Engineering Journal, 292, pp. 51-61.

  • Chicardi, E., Córdoba, J.M., Gotor, F.J. Kinetics of high-temperature oxidation of (Ti,Ta)(C,N)-based cermets (2016) Corrosion Science, 102, pp. 168-177.

  • Chicardi, E., Córdoba, J.M., Gotor, F.J. High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets (2016) Corrosion Science, 102, pp. 125-136.

  • Maicu, M., Glöß, D., Frach, P., Hecker, D., Gerlach, G., Córdoba, J.M. Photocatalytic properties of TiO2 thin films modified with Ag and Pt nanoparticles deposited by gas flow sputtering (2015) Journal of Nanoscience and Nanotechnology, 15 (9), pp. 6478-6486.

  • Chicardi, E., Torres, Y., Sayagués, M.J., Medri, V., Melandri, C., Córdoba, J.M., Gotor, F.J. Toughening of complete solid solution cermets by graphite addition (2015) Chemical Engineering Journal, 267, pp. 297-305.

  • Hvizdoš, P., Balko, J., Córdoba, J.M., Chicardi, E. Nanoindentation of (Ti,Ta)(C,N)-Co cermets prepared by methods of mechanochemistry (2015) International Journal of Refractory Metals and Hard Materials, 49 (1), pp. 219-224.

  • Chicardi, E., Gotor, F.J., Córdoba, J.M. Enhanced oxidation resistance of Ti(C,N)-based cermets containing Ta (2014) Corrosion Science, 84, pp. 11-20.

  • Sayagués, M.J., Avilés, M.A., Córdoba, J.M., Gotor, F.J. Self-propagating combustion synthesis via an MSR process: An efficient and simple method to prepare (Ti, Zr, Hf)B2-Al2O3 powder nanocomposites (2014) Powder Technology, 256, pp. 244-250.

  • Balko, J., Hvizdoš, P., Córdoba, J.M., Chicardi, E. Instrumented indentation of composite materials prepared by methods of mechanochemistry (2014) Key Engineering Materials, 606, pp. 241-244.

  • Chicardi, E., Torres, Y., Córdoba, J.M., Hvizdoš, P., Gotor, F.J. Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions (2014) Materials and Design, 53, pp. 435-444.

  • Gotor, F.J., Bermejo, R., Córdoba, J.M., Chicardi, E., Medri, V., Dalle Fabbriche, D., Torres, Y. Processing and characterisation of cermet/hardmetal laminates with strong interfaces (2014) Materials and Design, 58, pp. 226-233.

  • Córdoba, J.M., Chicardi, E., Poyato, R., Gotor, F.J., Medri, V., Guicciardi, S., Melandri, C. Spark plasma sintering of TixTa1-xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties (2013) Chemical Engineering Journal, 230, pp. 558-566.

  • Córdoba, J.M., Chicardi, E., Gotor, F.J. Liquid-phase sintering of Ti(C,N)-based cermets. the effects of binder nature and content on the solubility and wettability of hard ceramic phases (2013) Journal of Alloys and Compounds, 559, pp. 34-38.

  • Chicardi, E., Torres, Y., Córdoba, J.M., Sayagués, M.J., Rodríguez, J.A., Gotor, F.J. Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N)-based cermets (2013) International Journal of Refractory Metals and Hard Materials, 38, pp. 73-80.

  • Engström, A., Mouzon, J., Córdoba, J.M., Tegman, R., Antti, M.-L. Synthesis of a TiCN-SiC polyhedron and elongated crystals nanopowder at low nitrogen concentration (2012) Materials Letters, 81, pp. 148-150.

  • Chicardi, E., Córdoba, J.M., Sayagués, M.J., Gotor, F.J. Absence of the core-rim microstructure in TixTa1-xCyN1-y based cermets developed from a pre-sintered carbonitride master alloy (2012) International Journal of Refractory Metals and Hard Materials, 33, pp. 38-43.

  • Avilés, M.A., Chicardi, E., Córdoba, J.M., Sayagués, M.J., Gotor, F.J. In situ synthesis of ceramic composite materials in the Ti-B-C-N system by a mechanically induced self-sustaining reaction (2012) Journal of the American Ceramic Society, 95 (7), pp. 2133-2139.

  • Córdoba, J.M., Chicardi, E., Gotor, F.J. Development of multicomponent-multiphase materials based on (Ti,Ta,Nb)CxN1-x carbonitride solid solutions (2012) Chemical Engineering Journal, 192, pp. 58-66.

  • Escalera, E., Ballem, M.A., Córdoba, J.M., Antti, M.-L., Odén, M. Synthesis of homogeneously dispersed cobalt nanoparticles in the pores of functionalized SBA-15 silica (2012) Powder Technology, 221, pp. 359-364.

  • Sayagués, M.J., Córdoba, J.M., Gotor, F.J. Room temperature mechanosynthesis of the La1-xSrxMnO3±δ (0≤x≤1) system and microstructural study (2012) Journal of Solid State Chemistry, 188, pp. 11-16.

  • Chicardi, E., Córdoba, J.M., Sayagués, M.J., Gotor, F.J. Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction (2012) International Journal of Refractory Metals and Hard Materials, 31, pp. 39-46.

  • Ballem, M.A., Zhang, X., Johansson, E.M., Córdoba, J.M., Odén, M. Low temperature nanocasting of hematite nanoparticles using mesoporous silica molds (2012) Powder Technology, 217, pp. 269-273.

  • Córdoba, J.M., Chicardi, E., Avilés, M.A., Sayagués, M.J., Gotor, F.J. Integration of cermet component materials into a solid solution master alloys by mechanically self-sustaining reaction (2012) Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012, 2, .

  • Tsai, H.T., Córdoba, J.M., Johansson, E.M., Ballem, M.A., Odén, M. Silica SBA-15 template assisted synthesis of ultrasmall and homogeneously sized copper nanoparticles (2011) Journal of Nanoscience and Nanotechnology, 11 (4), pp. 3493-3498. 

  • Córdoba, J.M., Chicardi, E., Avilés, M.A., Gotor, F.J. Formation of the complete range of Ti5Si3-xGe x solid solutions via mechanically induced self-sustained reactions (2011) Intermetallics, 19 (11), pp. 1688-1692. 

  • Spencer, C.B., Córdoba, J.M., Obando, N., Sakulich, A., Radovic, M., Odén, M., Hultman, L., Barsoum, M.W. Phase evaluation in Al2O3 fiber-reinforced Ti2AlC during sintering in the 1300°C-1500°C temperature range (2011) Journal of the American Ceramic Society, 94 (10), pp. 3327-3334.

  • Avilés, M.A., Córdoba, J.M., Sayagués, M.J., Gotor, F.J. Mechanochemical synthesis of Ti1-xZrxB2 and Ti1-xHfxB2 solid solutions (2011) Ceramics International, 37 (6), pp. 1895-1904.

  • Ballem, M.A., Córdoba, J.M., Odén, M. Mesoporous silica templated zirconia nanoparticles (2011) Journal of Nanoparticle Research, 13 (7), pp. 2743-2748.

  • Córdoba, J.M., Ballem, M.A., Johansson, E.M., Odén, M. Growth of single crystalline dendritic Li2SiO3 arrays from LiNO3 and mesoporous SiO2 (2011) Journal of Solid State Chemistry, 184 (7), pp. 1735-1739.

  • Spencer, C.B., Cõrdoba, J.M., Obando, N.H., Radovic, M., Odén, M., Hultman, L., Barsoum, M.W. The reactivity of Ti2AlC and Ti3SiC2 with SiC fibers and powders up to temperatures of 1550°C (2011) Journal of the American Ceramic Society, 94 (6), pp. 1737-1743.

  • Johansson, E.M., Ballem, M.A., Córdoba, J.M., Odén, M. Rapid synthesis of SBA-15 rods with variable lengths, widths, and tunable large pores (2011) Langmuir, 27 (8), pp. 4994-4999.

  • Ballem, M.A., Johansson, E.M., Córdoba, J.M., Odén, M. Synthesis of hollow silica spheres SBA-16 with large-pore diameter (2011) Materials Letters, 65 (7), pp. 1066-1068.

  • Gustafsson, H., Ahrén, M., Söderlind, F., Córdoba Gallego, J.M., Käll, P.-O., Nordblad, P., Westlund, P.-O., Uvdal, K., Engström, M. Magnetic and electron spin relaxation properties of (GdxY1-x)2O3 (0 ≤ x ≤ 1) nanoparticles synthesized by the combustion method. Increased electron spin relaxation times with increasing yttrium content (2011) Journal of Physical Chemistry C, 115 (13), pp. 5469-5477.

  • Morales-Rodríguez, A., Gallardo-López, A., Domínguez-Rodríguez, A., Córdoba, J.M., Avilés, M.A., Gotor, F.J. Creep behavior of TiCxN1-x-CoTi cermets synthesized by mechanically induced self-sustaining reaction (2011) Journal of the European Ceramic Society, 31 (3), pp. 299-302.

  • Frodelius, J., Johansson, E.M., Córdoba, J.M., Odén, M., Eklund, P., Hultman, L. Annealing of thermally sprayed Ti2AlC coatings (2011) International Journal of Applied Ceramic Technology, 8 (1), pp. 74-84. 

  • Tamayo-Ariztondo, J., Córdoba, J.M., Odén, M., Molina-Aldareguia, J.M., Elizalde, M.R. Effect of heat treatment of carbon nanofibres on electroless copper deposition (2010) Composites Science and Technology, 70 (16), pp. 2269-2275.

  • Ullbrand, J.M., Córdoba, J.M., Tamayo-Ariztondo, J., Elizalde, M.R., Nygren, M., Molina-Aldareguia, J.M., Odén, M. Thermomechanical properties of copper-carbon nanofibre composites prepared by spark plasma sintering and hot pressing (2010) Composites Science and Technology, 70 (16), pp. 2263-2268.

  • Borrell, A., Fernandez, A., Torrecillas, R., Córdoba, J.M., Avilés, M.A., Gotor, F.J. Sintering by SPS of ultrafine TiCxN1-x powders obtained using mechanically induced self sustaining reaction [Sinterización por SPS de polvos ultrafinos de TiCxN1-x obtenidos mediante reacciones de autopropagación inducidas mecánicamente] (2010) Boletin de la Sociedad Espanola de Ceramica y Vidrio, 49 (5), pp. 357-360.

  • Johansson, E.M., Córdoba, J.M., Odén, M. The effects on pore size and particle morphology of heptane additions to the synthesis of mesoporous silica SBA-15 (2010) Microporous and Mesoporous Materials, 133 (1-3), pp. 66-74.

  • Borrell, A., Fernández, A., Torrecillas, R., Córdoba, J.M., Avilés, M.A., Gotor, F.J. Spark plasma sintering of ultrafine TiCxN1-x powders synthesized by a mechanically induced self-sustaining reaction (2010) Journal of the American Ceramic Society, 93 (8), pp. 2252-2256. 

  • Sayagués, M.J, Avilés, M.A., Córdoba, J.M., Alcalá, M.D., Gotor, F.J. Microstructural characterization of ceramic-intermetallic composites using TEM related techniques (2010) Journal of the European Ceramic Society, 30 (8), pp. 1765-1774.

  • Ballem, M.A., Córdoba, J.M., Odén, M. Influence of synthesis temperature on morphology of SBA-16 mesoporous materials with a three-dimensional pore system (2010) Microporous and Mesoporous Materials, 129 (1-2), pp. 106-111.

  • Avilés, M.A., Córdoba, J.M., Sayagués, M.J., Alcalá, M.D., Gotor, F.J. Mechanosynthesis of Hf1-xZrxB2 solid solution and Hf1-xZrxB2/SiC composite powders (2010) Journal of the American Ceramic Society, 93 (3), pp. 696-702.

  • Gallardo-López, A., Morales-Rodríguez, A., Domínguez-Rodríguez, A., Córdoba, J.M., Avilés, M.A., Gotor, F.J. High temperature mechanical properties of Ti(C,N)-Co-Mo2C cermets (2010) Key Engineering Materials, 423, pp. 83-88.

  • Yazdi, G.R., Vassilevski, K., Córdoba, J.M., Gogova, D., Nikitina, I.P., Syväjärvi, M., Odén, M., Wright, N.G., Yakimova, R. Free standing AlN single crystal grown on pre-patterned and in situ patterned 4H-SiC substrates (2010) Materials Science Forum, 645-648, pp. 1187-1190.

  • Johansson, E.M., Córdoba, J.M., Odén, M. Synthesis and characterization of large mesoporous silica SBA-15 sheets with ordered accessible 18 nm pores (2009) Materials Letters, 63 (24-25), pp. 2129-2131.

  • Córdoba, J.M., Odén, M. Growth and characterization of electroless deposited Cu films on carbon nanofibers (2009) Surface and Coatings Technology, 203 (22), pp. 3459-3464. 

  • Córdoba, J.M., Avilés, M.A., Sayagués, M.J., Alcalá, M.D., Gotor, F.J. Synthesis of complex carbonitride powders TiyMT1-yCxN1-x (MT: Zr, V, Ta, Hf) via a mechanically induced self-sustaining reaction (2009) Journal of Alloys and Compounds, 482 (1-2), pp. 349-355. 

  • Córdoba, J.M., Tamayo-Ariztondo, J., Molina-Aldareguia, J.M., Elizalde, M.R., Odén, M. Morphology influence of the oxidation kinetics of carbon nanofibers (2009) Corrosion Science, 51 (4), pp. 926-930. 

  • Córdoba, J.M., Sánchez-López, J.C., Avilés, M.A., Alcalá, M.D., Gotor, F.J. Properties of Ti(C,N) cermets synthesized by mechanically induced self-sustaining reaction (2009) Journal of the European Ceramic Society, 29 (6), pp. 1173-1182.

  • Córdoba, J.M., Alcalá, M.D., Sayagués, M.J., Avilés, M.A., Real, C., Gotor, F.J. Nitriding study of titanium silicide intermetallics obtained by mechanical alloying (2008) Intermetallics, 16 (8), pp. 948-954.

  • Córdoba, J.M., Alcalá, M.D., Avilés, M.A., Sayagués, M.J., Gotor, F.J. New production of TiCxN1-x-based cermets by one step mechanically induced self-sustaining reaction: Powder synthesis and pressureless sintering (2008) Journal of the European Ceramic Society, 28 (10), pp. 2085-2098. 

  • Córdoba, J.M., Sayagués, M.J., Alcalá, M.D., Gotor, F.J. Synthesis of Ti3SiC2 powders: Reaction mechanism (2007) Journal of the American Ceramic Society, 90 (3), pp. 825-830. 

  • Córdoba, J.M., Sayagués, M.J., Alcalá, M.D., Gotor, F.J. Monophasic nanostructured powders of niobium, tantalum, and hafnium carbonitrides synthesized by a mechanically induced self-propagating reaction (2007) Journal of the American Ceramic Society, 90 (2), pp. 381-387. 

  • Córdoba, J.M., Sayagués, M.J., Alcalá, M.D., Gotor, F.J. Monophasic TiyNb1-yCxN1-x nanopowders obtained at room temperature by MSR (2007) Journal of Materials Chemistry, 17 (7), pp. 650-653.

  • Córdoba, J.M., Sayagués, M.J., Alcalá, M.D., Gotor, F.J. Synthesis of titanium carbonitride phases by reactive milling of the elemental mixed powders (2005) Journal of the American Ceramic Society, 88 (7), pp. 1760-1764. 

  • Córdoba, J.M., Murillo, R., Alcalá, M.D., Sayagués, M.J., Gotor, F.J. Synthesis of TiN/Si3N4 composite powders by mechanically activated annealing (2005) Journal of Materials Research, 20 (4), pp. 864-873.

  • Supervisor of the Licentiate Marina Calero in her fellowship of Initiation to Research granted by Universidad de Sevilla. 2017. Inorganic Chemistry Dpte.

  • Supervisor of the Master Degree student Yunqing Tang in her fellowship of Research Collaboration granted by Spanish Government. 2017. Inorganic Chemistry Dpte.

Projects Involved

  • Project Title: Desarrollo de cermets con aleacionesd e alta entropía de mezcla como fase ligante para aplicaciones de mecanizado (MAT20114-52407-R1). Financial Entity: Plan Nacional. Ministerio de Ciencia y Tecnología (LR)

  • Project Title: Obtención y caracterización termomecánica de laminados cermet/metal duro (TEP2622). Financial Entity: Junta de Andalucía (AR)

  • Project Title: Development of composite materials based on non-oxidic refractory materials for use in hostile and extreme environments. Financial Entity: Scientific Co-operation Agreement CSIC-ICSM (Spain) and CNR-ISTEC (Italy) (LR)

  • Project Title: Diseño por procedimientos mecanoquímicos de materiales estructurales para aplicaciones tecnológicas de alta temperatura (MAT2011-22981). Financial Entity: Plan Nacional. Ministerio de Ciencia y Tecnología (AR).

  • Project Title: Mechanochemical synthesis and properties of nanosized materials. Financial Entity: Convenio CSIC/Academia Eslovaca de Ciencias (2009SK0002) (AR)

  • Project Title: DocMASE. Financial Entity: European Comission in Erasmus Mundus Programme (512225-1-2010-1-DE-ERA MUNDUS-EMJD) (CR)

  • Project Title: Mechanosynthesis of Materials with High Technological Interest.
    Financial Entity: Plan Nacional. Ministerio de Ciencia y Tecnología. (AR).

  • Project Title: Síntesis de materiales avanzados nanoestructurados por “mechanical alloying”. Financial Entity: Junta de Andalucía (AR)

  • Project Title: Interfacial engineering in Copper Carbon nanofibre composites (Cu-C, MMCs) for high thermally loaded applications (INTERFACE) STRP 031712 INTERFACE. Financial Entity: European Union through the 6th Framework Programme (LiU Patner LR)

  • Project Title: Caracterización y síntesis por molienda reactiva de aleaciones metálicas y nanocomposites cerámica/metal MAT2003-00184. Financial entity: Plan Nacional. Ministerio de Ciencia y Tecnología (SR)

Research Supervised

PhD Thesis Supervised

  • Title: Desarrollo de cermets basados en soluciones sólidas mediante procesos mecanoquímicos. PhD. Student: Ernesto Chicardi University: Universidad de Sevilla-CSIC Mark: A cum laude (2009-2014)

  • Title: Development of silica and carbon based mesoporous for mesoreactor applications. PhD. Student: Emma Johansson University: Linköpings University, IFM Mark: in progress (2008-2012)

  • Title: Synthesis and characterization of oxide nanoparticles by wet chemical reaction using mesoporous materials as mesoreactor. PhD. Student: Mohamed A. Ballen University: Linköpings University, IFM Mark: A cum laude (2007-2011)

Master Thesis Degree Supervised

  • Title: Controlling the pore size and morphology of mesoporous silica. PhD. Student: Emma Johansson University: Linköpings University, IFM Mark: A

  • Title: A comparison of electroless copper plated carbon nanofibres sintered by SPS and HP and characterization for heat sink applications. PhD. Student: Jennifer Ullbrand   University: Linköpings University, IFM  Period:2008-2009  Mark: A

  • Title: Copper nanoparticles synthesized via ECD deposition in sheet–like mesoporous type SBA-15. PhD. Student: Hao Tsao Tsei   University: Linköpings University, IFM   Period:  2008-2009   Mark: A

​Licenciate Thesis Degreee Supervised

  • Title: Viablidad de la síntesis de materiales basados en Mg2X (X= Si, Ti y Zr) mediante técnicas mecanoquímicas. Licenciate student: Julián J. Cáceres Murillo    University: Universidad de Sevilla    Date: 2017

  • Title: Fabricación de carburos cementados usando como fase aglomerante aleaciones de alta entropía. Licenciate student: Irene Limón Vela    University: Universidad de Sevilla    Date: 2017

  • Title: Viabilidad de la síntesis mecanoquímica para obtener La1-xSrxGaO3-δ con estructura perovskitas. Licenciate student: Yunqing Tang    University: Universidad de Sevilla    Date: 2017

  • Title: Evolución Estructural en el Sistema LaMn1-xFexO3-y. Licenciate student: Manuel Ponce    University: Universidad de Sevilla    Date: 2016

  • Title: Nanopartículas y su aplicación en terapias contra el cáncer. Licenciate student: Paula Espinosa Valiente    University: Universidad de Sevilla    Date: 2016

  • Title: Nanopartículas y su aplicación en terapias contra el cáncer. Metales nobles, el oro. Licenciate student: Marta Alonso Herreros de Tejada    University: Universidad de Sevilla    Date: 2016

  • Title: Optimización del procesado de cermets basados en carbonitruros complejos y aleaciones de alta entropía Licenciate student: Inés Fombella García    University: Universidad de Sevilla    Date: 2016

  • Title: Aspectos toxicológicos de los elementos Zn, Cd y Hg. Efecto sobre la salud. Licenciate student: Alicia Pedraza Cubero    University: Universidad de Sevilla    Date: 2015

Teaching Merits

Teaching Experience

  • Surface Engineering Course (Grade). 2014/2015; 15/16; 16/17; 17/18

  • Inorganic Optical Materials (Grade). 2014/2015; 15/16; 16/17; 17/18

  • Nanostructures and Materials Synthesis (Master). 2017/2018

Acreditations

  • ANECA positive evaluation as University Lecturer

  • ANECA positive evaluation as Private University Associate Professor

  • ANECA positive evaluation as Hired Lecturer

  • ANECA positive evaluation as Tenured Associate Professor

  • CAP, Adaptation for the College Teaching Staff by Seville University (US)

Teaching Publications

  • Book Chapter. Proyecto de innovación docente para el aprendizaje de los conceptos de qué, cómo y para qué en el campor de Materiales Ópticos Inorgánicos. III Jornadas de Docencia Universitaria (Universidad de Sevilla). Andalucía (España): ISBN 978-84-86849-76-4

Congress Contributions

  • III Jornadas de Docencia Universitaria. Sevilla, Andalucía, España.06/2016. Universidad de Sevilla

Other Merits

  • Member of the Court of the I Marathon of Chemistry. Sevilla, Andalucía, España. 05/2016. Universidad de Sevilla

  • Secretary of the Court of the XXX Olimpic of Chemistry of Seville University. Sevilla. Andalucía. 03/2017. Universidad de Sevilla

Congress Contributions

  • 24th International Symposium on Metastable, Amorphous and Nanostructured Materials. 2017. Contributions: 4

  • XIV Congreso Nacional de Materiales. 2016. Contributions: 2

  • 32º Congreso Español de Fractura e Integridad Estructural. 2015. Contributions: 2

  • Advances in Materials & Processing Technologies. 2015. Contributions: 1

  • EUROMAT2013. 2013. Contributions: 2

  • 18th Plansee Seminar. 2013. Contributions: 3

  • Euro EPMA2012. 2012. Contributions: 1

  • IV Congreso Nacional de Pulvimetalrgia. 2012. Contributions: 2

  • 15th European Microscopy Congress. 2012. Contributions: 2

  • IV Portuguese-Spanish Congress on Ceramics and Glasses. 2011. Contributions: 3

  • VII International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2011). 2011, Contributions: 3

  • ECerS XII 12th Conference of the European Ceramic Society. 2011. Contributions: 2

  • 2nd Joint Congress of the Portuguese and Spanish Microscopy Societies. 2011. Contributions: 2

  • 34th International Conference and Exposition on Advanced Ceramics and
    Composites (ICACC). 2010. Contributions. 1

  • 7th International Mesoporous Materials Symposium. 2010. Contributions: 3

  • JSPS Sweden-Japan Joint Symposium. 2010. Contributions: 1

  • The 7th Pacific Rim International Conference on Advanced Materials and
    Processing (PRICM 7). 2010. Contributions: 1

  • EUROMAT 2009. 2009. Contributions: 4

  • 29th International exhibitions Congress on Chemical Engineering Environmental Protection and Biotechnology. 2009. Contributions. 1

  • XXIV Congress of the Spanich Microscopy Society and XLIV Annual Meeting of the Portuguese Society for Microscopy. 2009. Contributions: 1

  • Sixth Internacional Conference on Inorganic Materials. 2008. Contributions: 1

  • XI Congreso Nacional de Propiedades Mecánicas de los Sólidos. 2008. Contributions: 1

  • Congreso Anual de la Sociedad Española de Cerámica y Vidrio. 2008. Contributions: 1

  • Reunión Bienal de la Sociedad de Microscopía de España2007. Contributions: 1

  • EUROMAT 2007. 2007. Contributions. 1

  • Congreso Nacional de Propiedades Mecánicas de Sólidos. 2006. Contributions: 1

  • 16th International Microscopy Congress. 2006. Contributions: 2

  • I International Congress on Ceramics. 2006. Contributions: 1

  • Reunión Anual de la Sociedad Española de Cerámica y Vidrio. 2005. Contributions: 1

  • 7th International Conference on Nanostructured Materials. 2005. Contributions: 1

  • XLIII Congreso de la Sociedad Española de Cerámica y Vidrio. 2004. Contributions: 1

bottom of page